by Jonathan Updated Jun 10, 2021 Published Jun 10, 2021 Raspberry Pi News ahci, assemble, assembly, backup, board, ceph, cluster, cm4, compute module, compute module 4, controller, custom, data, design, driver, enclosure, freenas, gigabit, guide, hard drive, HDD, homelab, how to, Jeff Geerling, kernel, marvell, model b, nas, network attached storage, omv, open media vault, open source, openmediavault, pci, pci express, pi 4, pi os, raspberry pi, recompile, SATA, server, solid state disk, ssd, storage, wiretrustee
I’ve built a few Raspberry Pi NASes in my day, but none were *this* nice. The Wiretrustee SATA is listed on Crowd Supply and will allow you to plug in a Raspberry Pi Compute Module 4 and up to four SATA hard drives or SSDs to build your own gigabit NAS....
by Jonathan Updated Apr 2, 2021 Published Apr 2, 2021 Raspberry Pi News 2.5G, asustor, benchmark, btrfs, build, caching, cm4, comparison, compute module, compute module 4, data, debian, disk, disks, diy, drives, guide, hard drive, hardware, how to, iperf3, ironwolf, iscsi, itx, Jeff Geerling, link aggregation, linux, make, media, nas, network attached storage, nvme, omv, open media vault, PC, pci, pci express, performance, pi, pi nas, power supply, psu, raid, raid 0, raid 10, raid 5, raid 6, raspberry pi, san, seagate, setup, ssd, storage, western digital, zfs
How does my 2.5 Gbps Raspberry Pi NAS compare to a dual 2.5 Gbps ASUSTOR Lockerstor 4? Find out in this video, the second part of a two-part series. I will explore the software on both NASes—ADM on the Lockerstor and OMV on the Raspberry Pi—and run some performance...
by Jonathan Updated Mar 26, 2021 Published Mar 26, 2021 Raspberry Pi News 2.5G, asustor, btrfs, build, caching, cm4, compute module, compute module 4, data, debian, disk, disks, diy, drives, guide, hard drive, hardware, how to, ironwolf, iscsi, itx, Jeff Geerling, link aggregation, linux, make, media, nas, network attached storage, nvme, omv, open media vault, PC, pci, pci express, pi, pi nas, power supply, psu, raid, raid 0, raid 10, raid 5, raid 6, raspberry pi, san, seagate, setup, ssd, storage, western digital, zfs
ASUSTOR and Seagate sent me a brand new NAS and hard drives. They wanted me to see if my little Raspberry Pi NAS could keep up. The results? Well, they might surprise you. This video details the hardware setup process and some thoughts on whether you might be better...
