by Jonathan Updated May 14, 2021 Published May 14, 2021 Raspberry Pi News
12g, 24g, 48g, adapter, backplane, benchmark, broadcom, Cables, card, chia, cm4, cm6, compute module, computers, computing, controller, cryptocurrency, elrond, enterprise, flash, gen 2, gen 4, hard drive, HDD, hot-plug, hot-swap, intel, io board, Jeff Geerling, kioxia, lanes, megaraid, nvme, pci express, pcie, performance, pm6, raid, raspberry pi, sas, servers, SFF-TA-1001, SFF-TA-1005, solid state drive, ssd, storage, surprise, surprise plug, test, tri-mode, u.2, u.3, u2, u3, ubm, universal backplane management
It took some convincing, but KIOXIA sent me two of their latest Enterprise SSDs, the PM6 SAS 24G drive, and the CM6 PCIe NVMe drive, and I test them using the MegaRAID card and ‘Elrond’ storage enclosure sent to me by Broadcom. How do the drives perform?...
by Jonathan Updated May 13, 2021 Published May 13, 2021 Raspberry Pi News
1080, 16x, adapter, arm, arm64, bar space, cm4, compute module, compute module 4, driver, gpu, graphics, graphics card, gtx, headers, install, io board, Jeff Geerling, kernel, linux, memory, msi, nouveau, nvidia, pci, pci express, pcie, pi os, plug, power, processor, psu, raspberry pi, raspberrypi, Raspbian, recompile, support
A friend sent me his MSI Nvidia GeForce GTX 1080. I’m going to plug it into my Raspberry Pi Compute Module 4 and see what happens. I’ll also probably recompile the Linux kernel, live! Besides this video, you can check out my progress on...
by Jonathan Updated May 6, 2021 Published May 6, 2021 Raspberry Pi News
3d print, arduino, boards, build, built, buy, campaign, Case, cm4, compute module, compute module 4, create, crowd supply, custom, dupont, enclosure, hard drives, hardware, io board, itx, Jeff Geerling, kicad, kickstarter, make, maker, mebs_t, mini itx, model, motherboard, nas, network attached storage, PC, pci, pci express, pcie, pi os, piunora, projects, r3, raspberry pi, raspberrypi, seaberry, uno, wd red, x1, x16
There are new boards in town. The Compute Module 4 ecosystem is expanding at a rapid pace, and I don’t even have time to cover all the new projects I’ve found! The three I cover in this video include: – CM4 NAS by mebs_t:...
by Jonathan Updated Apr 23, 2021 Published Apr 23, 2021 Raspberry Pi News
750 ti, aarch64, ai, amd, arm, arm64, asrock rack, asus, Bitcoin, crypto, cuda, development, drivers, dvi, ethereum, evga, gpu, graphics card, gt, gtx, hdmi, Jeff Geerling, kernel, linux, m2_vga, miners, mining, ml, nvidia, output, pci, pci express, pcie, power, processing, radeon, raspberry pi, recompile, riser, rtx, rx 550, sapphire, sm750, vga, video card
Last year I tried getting older AMD and Nvidia graphics cards working on the Raspberry Pi Compute Module 4. I was not successful. Armed with three new video cards—newer-gen AMD and Nvidia cards, plus a teensy-tiny M.2 video card from ASRock Rack—can I...
by Jonathan Updated Apr 2, 2021 Published Apr 2, 2021 Raspberry Pi News
2.5G, asustor, benchmark, btrfs, build, caching, cm4, comparison, compute module, compute module 4, data, debian, disk, disks, diy, drives, guide, hard drive, hardware, how to, iperf3, ironwolf, iscsi, itx, Jeff Geerling, link aggregation, linux, make, media, nas, network attached storage, nvme, omv, open media vault, PC, pci, pci express, performance, pi, pi nas, power supply, psu, raid, raid 0, raid 10, raid 5, raid 6, raspberry pi, san, seagate, setup, ssd, storage, western digital, zfs
How does my 2.5 Gbps Raspberry Pi NAS compare to a dual 2.5 Gbps ASUSTOR Lockerstor 4? Find out in this video, the second part of a two-part series. I will explore the software on both NASes—ADM on the Lockerstor and OMV on the Raspberry Pi—and run some...