by Jonathan Updated Jun 22, 2022 Published Jun 22, 2022 Raspberry Pi News
10g, 2.5G, 45drives, 60xl, appliance, archive, arm, ASMR, broadcom, ceph, chassis, cluster, consumption, copy, cpu, datacenter, efficient, exos, file, firmware, flash, hba, Jeff Geerling, kill a watt, lan, lsi, measure, nas, network, nfs, nic, overclock, pb, pci, pci express, pcie, pebibyte, performance, petabyte, pib, power, rack, rackmount, rails, raspberry pi, samba, SATA, seagate, server, smb, soc, sound, spindown, storage, storinator, sysadmin, usage, vault, windows, xeon, xl60
Sometimes you have to go slow to go fast—with 60 hard drives on 1 Raspberry Pi, I found a way to make it run in RAID! It’s not the fastest storage server in town, but it’s good for about 70 MB/sec write speeds and sucks down about 500 Watts of...
by Jonathan Updated Nov 17, 2021 Published Nov 17, 2021 Raspberry Pi News
10 gigabit, 10g, 1g, 2.5G, asmedia, attached, benchmark, cm4, comparison, compute module 4, ethernet, gigabits, gpu, homelab, Jeff Geerling, lambda, linux, mdadm, multi-gig, nas, network, networking, nfs, pci express, pcie, penta, performance, rack, radxa, raid, raid 0, raid 5, raidz1, raspberry pi, review, samba, sas, SATA, sbc, sponsored, storage, switch, taco, zfs
Check out this video’s sponsor, Lambda: https://lambdalabs.com Radxa’s Taco, along with a boatload of SSDs, is the new gold standard Raspberry Pi-based NAS. But my 48TB SSD NAS build is probably a dumb idea. Why? Well, watch the video and find out!...
by Jonathan Updated Jul 7, 2021 Published Jul 7, 2021 Raspberry Pi News
10 gbe, 10 gigabit, 10g, 10GBase-T, aquantia, asus, ccna, cm4, comptia, compute module, compute module 4, cross compile, driver, ethernet, fast, fiber, gigabit, iperf3, Jeff Geerling, kernel, lan, linux, mikrotik, network, networking, optical, pci, pci express, pcie, performance, pi os, raspberry pi, recompile, red shirt jeff, rj-45, router, sfp, speed, switch, ubuntu, wan, xg-c100c
The Raspberry Pi Compute Module 4 works great with a 10 GbE NIC. But at what cost? Well, I tallied it up – here’s the gear I bought in the course of making this video: – ASUS XG-C100C 10G NIC: https://amzn.to/3AaAwWQ ($93) – Mikrotik 5-port 10...
by Jonathan Updated Jan 8, 2021 Published Jan 8, 2021 Raspberry Pi News
10g, antenna, asus, benchmark, benchmarking, cm4, compare, comparison, compute module, compute module 4, debian, dhcpcd, dhcpd, ethernet, faster, github, iperf, iperf3, Jeff Geerling, kernel, linux, mac, network, networking, performance, pi 4, pi os, raspberry pi, rj45, router, rx, speed, stack, test, testing, tx, wifi, wifi 6, wired, wireless
As it turns out, my benchmarking process was flawed, and I had to learn a bit about the Linux networking stack to figure out why! Special thanks to commenter marvell marvell for pointing out the obvious, and to Javier Choclin for suggesting I try out the MZHOU...
by Jonathan Updated Dec 30, 2020 Published Dec 30, 2020 Raspberry Pi News
10g, 16x, 1x, bar, base address register, card, compilation, cross compile, debug, dmesg, driver, drivers, expansion, Jeff Geerling, kernel, linux, lspci, memory, module, nas, nvme, pci, pci express, pcie, powered, psu, raspberry pi, riser, SATA, slot, Software, storage
The Raspberry Pi Compute Module 4 IO Board exposes an x1 PCI Express Gen 2.0 slot. What can you do with the slot? And are there any tips or tricks to make sure you don’t accidentally cook a PCIe card—or the Pi? See all the cards I am testing:...
