I built a water cooled Raspberry Pi 4 a couple of weeks ago. This was obviously crazy overkill for a single Raspberry Pi, but it isn’t actually why I bought the water cooling kit, I bought it along with 7 other Raspberry Pis so that I could try building my own water cooled Pi Cluster. I’ve really enjoyed the past few weekends putting it together. So, here’s a video of my Pi 4 cluster build, I hope you enjoy it!
For the full write up of the build, visit my blog – https://www.the-diy-life.com/building-a-water-cooled-raspberry-pi-4-cluster/
Basic Parts List & Purchase Links
8 x Raspberry Pi 4B (2GB Model Used) – https://amzn.to/3i0eYni
TP-Link 16 Port Ethernet Switch – https://amzn.to/2Ldn9km
Rav Power USB Charging Hub – https://amzn.to/2MNCSH3
HD Touchscreen Monitor – http://amzn.to/38ug1Zq
Water Cooling Kit – http://bit.ly/3sfTAiO
8 x 30mm Cooling Blocks – http://bit.ly/38vZa8I
8 x Ethernet Patch Leads – http://amzn.to/3nBgXPX
8 x USB C Cables – https://amzn.to/35rOwOp
3m RGB LED Strip – https://amzn.to/3nyaPbt
M3 Standoff Mount Kit – https://amzn.to/38u6Qs8
M3 Screw Kit – https://amzn.to/38wl63J
3mm MDF Board Approx. 600 x 600mm
Note: Some of the above parts are affiliate links. By purchasing products through the above links, you’ll be supporting this channel, with no additional cost to you.
If you’ve got any ideas for tech or electronics projects or tutorials which you’d like me to try out, let me know in the comments section.
source
